SILVET® 330-20-E Aluminum Pigment  
PRODUCT DESCRIPTION
Silvet® 330-20-E is a very fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. Silvet® grades with an ?E? suffix are more economical than Silvet® ?E1? grades and have similar ease of handling, but have slightly duller metallic effects and require more aggressive processing conditions for complete dispersion. This is an economical grade and can be used to create a gray masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. Silvet 330-20-E is suitable for use in both plastics and powder coatings applications.
-Fine, regular flake grades
-Pellets
-Leafing
-Cornflake
PRODUCT APPLICATION
Silvet® E grades are economical aluminum pigments provided in pellet form for easy handling and incorporation. They are compatible with a variety of polymers, particularly polyolefins. They are typically used to make concentrates or compounds for use in final processing by injection molding, extrusion, blow molding or blown film processes. Because of their high aluminum pigment concentration and highly compacted form, they are recommended for use in masterbatch or compounding processes where enough shear exists to completely disperse the aluminum pigment. They are not recommended for use directly in end-use processing.
TECHNICAL DATA
Non-Volatile:98.5 minimum by weight
Particle Size (microns):8
Specific Gravity:ca 1.93
Composition:80% (+/- 2%) Al flake, 20% (+/- 2%) carrier
Carrier:PE Wax
Carrier Percentage:
INCORPORATION GUIDELINES
It is normally sufficient to tumble blend the pellets with the base resin and any additional colorants or additives before processing. Incorporation techniques should not subject the flakes to high shear forces.
SAFETY AND HANDLING

Aluminium pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a dry room at a temperature below the flash point of the solvent. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. For additional information, please refer to MSDS 700 for this product, or the Aluminium Association’s “TR-2” brochure, both of which are available by calling the Silberline phone number at the bottom of the page.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered soley for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. © 2006 Silberline Manufacturing Co.,Inc. All Rights Reserved.